Load Cell 220

  • Approved to OIML R60 up to 6000D
  • Output trimmed to 2mV/V ± 0.1%
  • Ideal for car, silo and tank weighing
  • Compatible intelligent Load Cell Amplifiers and Weighing Indicators available
  • Optional ATEX II 1 GD EEx ia IIC T6 approval available
  • Suitable Mounting Arrangements available
  • Hermetically sealed to IP68 by welding
Capacities: 5, 10, 20, 30, 50 t

The Load Cell 220 bending ring rang of load cells is available in capacities from 5000 kg to 50000 kg. This high quality stainless steel load cell has a very low deflection and a high resonant frequency allowing high resolution

Load Cell 3510

  • Approved to OIML R60 up to 6000D
  • Stainless Steel construction
  • Ideal for floor scales, silo and hopper weighing
  • Compatible intelligent Load Cell Amplifiers and Weighing Indicators available
  • Optional ATEX II 1GD EEx ia IIC T6 Approval available
  • Sealed to IP68 by welding
  • Fitted with a 6 wire double shielded cable
  • A wide range of suitable Mounting Arrangements
Capacities: 300, 500, 1000, 1200, 2000, 3000, 5000 kg

The  stainless steel shear beam load cell 3510 is hermetically sealed by welding and is available in capacities from 300 kg to 5000 kg. The T end option of this load cell is specifically designed to be used with a

Load Cell Mounting 66-20

  • Low profile design
  • Designed for the Model Q50 Compression Disk Load Cell
  • Capacities from 0.5 t to 30 t
  • Ideal for hopper and tank weighing applications
  • Integrated lift off protection
  • Mild steel, plated or electro-polished stainless steel construction
  • Load cell replacement requires minimal lifting height
Capacities: 0.5, 1, 2, 5, 10, 20, 30 t

The model 66-20 weigh module is designed for the model Q50 compression disk load cell. Available in a plated mild steel or electro-polished stainless steel construction, its low profile design makes it easy to install. Ideal for harsh industrial hopper

Load Cell Mounting CMX-3510

  • Complete mounting arrangement for Load Cell 3510
  • Ideal for Hopper and Silo weighing
  • Robust, industrial stainless steel construction with mechanical lift off.
  • Built-in jacking facility
  • Heavy duty braid between to and bottom plates
  • Complete with screws and cable protection

The Mounting Set CMX-3510 is a complete mounting arrangement for the Load Cell 3510 and the Load Cell 3410. Constructed entirely from stainless steel, it is ideally suited to applications in the food and chemical industries as well as outdoors. The

Load Cell Mounting CMX-355

  • Complete mounting arrangement for the Load Cell 355
  • Ideal for Hopper and Silo weighing
  • Robust, industrial stainless steel construction with
  • Mechanical lift off.
  • Built-in jacking facility
  • Heavy duty braid between to and bottom plates
  • Complete with screws and cable protection

The Mounting CMX-355 is a complete mounting arrangement for the load cell 355. Constructed entirely from stainless steel, it is ideally suited to applications in the food and chemical industries as well as outdoors. The built-in jacking facility allows the

Load Cell Mounting PLH1

  • Self aligning module with excellent load introduction
  • Complete Installation for the Load Cell SM63
  • Ideal for the silo, tank and truck scales
  • Manufactured from high quality tool steel,
  • Integrated lift off and bumper stops.
  • Easy assembly, ideal for large silos & tanks

The new weighing module PLH1 was especially developed for the load cell SM63 and offers a cheap and simple solution to integrate  weighing systems into large tanks and silos. The PHL1 provides excellent load introduction while maintaining the maximum possible

Load Cell Mounting SF-3510T

  • Complete mounting accessory for Load Cell 3410 and 3510
  • Rubber foot with domed load adaptor
  • Robust and corrosion free stainless steel
  • Ideal for platform, container and floor scales
  • Provides precise axial and torque free loading
  • Acid resistant Neoprene material with high Shore hardness
  • Compatible Load Cell Amplifiers & Instruments available

Whenever several load cells (Bending and Shear Beam type load cells in particular) are built into a scale or platform, some flexibility must be introduced into the mechanical design to allow for expansion (due to temperature) and the bending and

Load Cell Mounting SF-3510T-HA

  • Complete mounting accessory for the load cell 3410 and 3510
  • Rubber foot with domed load adaptor
  • Robust and corrosion free stainless steel
  • Ideal for platform, container and floor scales
  • Provides precise axial and torque free loading
  • Acid resistant Neoprene material with a high Shore hardness
  • Compatible Load Cell Amplifiers & Instruments available

Whenever several load cells (Bending and Shear Beam type load cells in particular) are built into a scale or platform, some flexibility must be introduced into the mechanical design to allow for expansion (due to temperature) and the bending and

Load Cell Mounting SF-3510T-HA

Load Cell Mounting SFM-3510T

  • Complete mounting accessory for Load cell 3410 and 3510
  • Rubber foot with domed load adaptor
  • Robust and corrosion free stainless steel
  • Ideal for platform, container and floor scales
  • Provides precise axial and torque free loading
  • Compatible Load Cell Amplifiers & Instruments
  • Acid resistant Neoprene material with a high Shore hardness

Whenever several load cells (Bending and Shear Beam type load cells in particular) are built into a scale or platform, some flexibility must be introduced into the mechanical design to allow for expansion (due to temperature) and the bending and

Load Cell Mounting SM-220R

  • Complete mounting arrangement for the Load Cell 220
  • Available for capacities from 5 to 30 T
  • Robust, Industrial steel construction
  • Built in lift off protection
  • Integrated jacking facility
  • Can tolerate load misalignment up to ± 3 ° from vertical
  • Alloy steel and Stainless steel options.

The Load Cell Mounting SM-220-R provides a complete mounting arrangement for the load cell model 220. The mount consists of a top plate and a base plate connected to each other by 2 hex nuts and bolts. Nuts on these