Load Cell 355

  • Approved to OIML R60 up to 4000D
  • Stainless steel construction
  • Compatible intelligent Load Cell Amplifiers and Weighing Indicators available
  • Ideal for platform and floor scales
  • Optional ATEX II 1GD EEx ia IIC T6 Approval available
  • Hermetically Sealed to IP68 by welding
  • A wide range of suitable Mounting Arrangements
Capacities: 5, 10, 20, 30, 50,100, 200, 250, 500 kg

The load cell 355 is one of the absolute classic load cell designs. For more than 25 years, this highly reliable stainless steel load cell has remained unchanged and has been used in millions of industrial applications. Typical applications include

Load Cell Mounting B&C-355

  • Mounting arrangement for the Load Cell 355
  • Ideal for platforms, hopper and conveyor scales
  • High self centering forces for better repeatability
  • Stainless steel ball & cup, neoprene sleeve (B&C-355)
  • Optional stainless steel Base Kit (BK-355)

The  load cell 355 is often used in multi-cell applications where it can be subjected to side loads, moments and torque if not mounted correctly. These types of forces interfere with the load cells ability to weigh correctly. Using the

Load Cell Mounting CMX-355

  • Complete mounting arrangement for the Load Cell 355
  • Ideal for Hopper and Silo weighing
  • Robust, industrial stainless steel construction with
  • Mechanical lift off.
  • Built-in jacking facility
  • Heavy duty braid between to and bottom plates
  • Complete with screws and cable protection

The Mounting CMX-355 is a complete mounting arrangement for the load cell 355. Constructed entirely from stainless steel, it is ideally suited to applications in the food and chemical industries as well as outdoors. The built-in jacking facility allows the

Load Cell Mounting SF-355

  • Self aligning foot for the model Load Cell 355
  • Stainless steel construction
  • Excellent load introduction
  • Low profile
  • Ideal for constructing low capacity platform scales
  • Easy installation
  • Can be used with optional base kit BK-355

Whenever several load cells (Bending and Shear Beam type load cells in particular) are built into a scale or platform, some flexibility must be introduced into the mechanical design to allow for expansion (due to temperature) and the bending and

Load Cell PC60

  • Approved to OIML R60 3000D
  • Total Error 0.020%
  • Maximum Platform Size 600 x 600mm
  • Available in capacity ranges from 30kg to 750kg
  • Ideal for Platform, Floor and Conveyor Scales
  • Sealed to IP66
  • 6 wire sheilded cable
  • Optional ATEX approval available
Capacities: 30, 50, 100, 200, 300, 500, 750 kg

The load cell model PC60 was developed for use in large, inexpensive platform scales. Typical applications include belt weighing, check weighing and bag filling. Other applications also include overhead rail weighing, dispensing and pallet scales as well as industrial applications, such

Load Cell PC7

  • Approved to OIML R60 4000D
  • Maximum platform size 600 x 600 mm
  • Available in capacity 100kg, 250kg and 500kg
  • Robust stainless steel construction
  • Hermetically sealed to IP 68
  • Ideal for platform and floor scales in harsh environments
  • 6-wire sense technique with shielded cable
  • Optional Hazardous area approval (ATEX) available
Capacities: 100, 250, 500 kg

The  load cell PC7 is ideal for applications in harsh industrial environments where aggressive chemicals may be present or where there are continual wash downs such as in the food industry. Typical applications include check weighing and bag filling as

Load Cell SB8

  • High accuracy and long term stability
  • Output trimmed and current matched
  • Available in capacity ranges from 10 kg to 500 kg
  • Ideal for harsh environments and industrial applications
  • Very compact stainless steel construction.
  • Hermetically sealed to IP68
  • Six wire polyurethane cable with shield
  • Optional ATEX approval available
Capacities: 10, 20, 50, 100, 200, 250, 500 kg

The load cell SB8 is stainless steel load cell available in capacity ranges from 10kg to 500kg. It is hermetically sealed to IP68 and is designed to be used singularly or in multicell applications. Typical applications include platform scales, silo

Load Cell SHBxR

  • High accuracy and long term stability
  • Output signal rationalised ( 2.0 mV/V ± 0.1%)
  • Current matched (SC) units also available
  • Available in capacity ranges from 5 kg to 500 kg
  • Ideal for harsh environments and industrial applications
  • Stainless steel construction sealed to IP66 and IP 68
  • Optional ATEX approval available
  • 4-wire cable standard, 6 wire cable optional
Capacities: 5, 10, 20, 30, 50, 100, 200, 350, 500 kg.

The model SHBxR is a fully welded stainless steel bending beam load cell. It is available in capacities from 5 kg to 500 kg. This product is suitable for low capacity platform scales, packing machines, hybrid scale and process weighing.