• Mounting arrangement for the Load Cell 355
  • Ideal for platforms, hopper and conveyor scales
  • High self centering forces for better repeatability
  • Stainless steel ball & cup, neoprene sleeve (B&C-355)
  • Optional stainless steel Base Kit (BK-355)

The  load cell 355 is often used in multi-cell applications where it can be subjected to side loads, moments and torque if not mounted correctly. These types of forces interfere with the load cells ability to weigh correctly. Using the

  • Complete mounting arrangement for the Load Cell 355
  • Ideal for Hopper and Silo weighing
  • Robust, industrial stainless steel construction with
  • Mechanical lift off.
  • Built-in jacking facility
  • Heavy duty braid between to and bottom plates
  • Complete with screws and cable protection

The Mounting CMX-355 is a complete mounting arrangement for the load cell 355. Constructed entirely from stainless steel, it is ideally suited to applications in the food and chemical industries as well as outdoors. The built-in jacking facility allows the

  • Self aligning foot for the model Load Cell 355
  • Stainless steel construction
  • Excellent load introduction
  • Low profile
  • Ideal for constructing low capacity platform scales
  • Easy installation
  • Can be used with optional base kit BK-355

Whenever several load cells (Bending and Shear Beam type load cells in particular) are built into a scale or platform, some flexibility must be introduced into the mechanical design to allow for expansion (due to temperature) and the bending and

  • Mounting accessory for the Load Cell 355
  • Available for capacities from 5 kg up to 250 kg
  • ideal for dealing with shock loads and vibration
  • Provides essential centering forces
  • Available separately (SHKM-355)
  • Available with optional base kit (BK-355)

In some applications, load cells may be subjected to vibration or even shock loads. Also when ever several load cells (Bending and Shear Beam type load cells in particular) are built into a scale or platform, some flexibility must be

  • Complete mounting arrangement for the Load Cell 355
  • Available for load cell capacities from 5 kg up to 250 kg
  • Self aligning rod end bearings
  • Stainless steel construction
  • Ideal for low capacity high accuracy applications
  • Easy installation and removal of the load cell

It is often necessary to measure a force or weight (in tension or compression) over a very small range but to a high accuracy. For larger capacity ranges of say 100 kg or more, special S type load cells have been

  • Complete mounting arrangement for Load Cell 3510
  • Ideal for Hopper and Silo weighing
  • Robust, industrial stainless steel construction with mechanical lift off.
  • Built-in jacking facility
  • Heavy duty braid between to and bottom plates
  • Complete with screws and cable protection

The Mounting Set CMX-3510 is a complete mounting arrangement for the Load Cell 3510 and the Load Cell 3410. Constructed entirely from stainless steel, it is ideally suited to applications in the food and chemical industries as well as outdoors. The

  • Complete mounting accessory for Load Cell 3410 and 3510
  • Rubber foot with domed load adaptor
  • Robust and corrosion free stainless steel
  • Ideal for platform, container and floor scales
  • Provides precise axial and torque free loading
  • Acid resistant Neoprene material with high Shore hardness
  • Compatible Load Cell Amplifiers & Instruments available

Whenever several load cells (Bending and Shear Beam type load cells in particular) are built into a scale or platform, some flexibility must be introduced into the mechanical design to allow for expansion (due to temperature) and the bending and

  • Complete mounting accessory for the load cell 3410 and 3510
  • Rubber foot with domed load adaptor
  • Robust and corrosion free stainless steel
  • Ideal for platform, container and floor scales
  • Provides precise axial and torque free loading
  • Acid resistant Neoprene material with a high Shore hardness
  • Compatible Load Cell Amplifiers & Instruments available

Whenever several load cells (Bending and Shear Beam type load cells in particular) are built into a scale or platform, some flexibility must be introduced into the mechanical design to allow for expansion (due to temperature) and the bending and

  • Complete mounting accessory for Load cell 3410 and 3510
  • Rubber foot with domed load adaptor
  • Robust and corrosion free stainless steel
  • Ideal for platform, container and floor scales
  • Provides precise axial and torque free loading
  • Compatible Load Cell Amplifiers & Instruments
  • Acid resistant Neoprene material with a high Shore hardness

Whenever several load cells (Bending and Shear Beam type load cells in particular) are built into a scale or platform, some flexibility must be introduced into the mechanical design to allow for expansion (due to temperature) and the bending and

  • Self aligning module with excellent load introduction
  • Complete Installation for the Load Cell SM63
  • Ideal for the silo, tank and truck scales
  • Manufactured from high quality tool steel,
  • Integrated lift off and bumper stops.
  • Easy assembly, ideal for large silos & tanks

The new weighing module PLH1 was especially developed for the load cell SM63 and offers a cheap and simple solution to integrate  weighing systems into large tanks and silos. The PHL1 provides excellent load introduction while maintaining the maximum possible