|
|
Weighing Indicator
NPR
|
- Approved to OIML R76 for 4000d
- RS232 and RS422 interface for PC / PLC & Printers
- Rugged aluminium housing with screw terminals
- Optional analogue output 0/4..20mA 16 bit resolution
- 2 setpoints with solid state relay outputs
- 6 opto-isolated logic inputs for remote key operation
- Cost effective Industrial Indicator
|
|
|
|
Battery Powered Weighing Indicator
MW-LE
|
- Approved to OIML R76 for 4000d
- RS-232 and RS-422 interface for PC / PLC & Printers
- 50 samples per second, 0.005% Linearity
- Ideal for all mobile weighing applications 12/24 V DC
- 5 logic inputs and 2 open-collector logic outputs
- Piece counting and pre-set tare functions
- Rugged aluminium housing with screw terminals connections
|
|
|
|
Weighing Indicator
QMA
|
- Approved to OIML R76 for 10,000d
- RS232 and RS422 interface for PC / PLC & Printer
- 1000 samples per second, 0.0015% Linearity
- 4 setpoints with solid state relay outputs
- 8 opto-isolated logic inputs for remote key operation
- Optional Profibus DP interface
- Optional analogue output 0 .. 10V or 0/4...20mA
|
|
|
|
Strain Gauge Transducer Indicator
FMD
|
- Ideal for all force and torque applications
- Peak, Track, Min/Max and Hold mode available
- RS232 or RS422 interface for connection to PC or PLC
- 250 samples per second, 0.005% Linearity
- Analogue output 0/4..20mA or 0 ..10 V
- 2 Setpoints with solid state relay outputs
- 4 optically isolated inputs for remote keyboard operation
|
|
|
|
Filling Controller & Indicator
SAI-MV
|
- Approved to 4000d NMI, 250 samples/sec 16 bit ADC
- Ideal for filling and dosing applications
- 2 solid state relay outputs for coarse and fine filling
- In-flight correction, automatic or manual
- Gross or net filling (auto tare on Start filling)
- 5 logic inputs which includes Start and Stop filling
- RS232 interface with ASCII protocol for PC communication
- Optional RS422 interface for multi-drop bus
- Robust panel mounted aluminum housing
|
|
|
|
Checkweighing Indicator
SAI-CK
|
- Designed for use with in-line checkweigher
- 250 samples per second
- Approved by NMI to 4000d :Certificate TC2636
- Too high, too low and pass judgements in milliseconds
- Solid state relay outputs for too high and too low
- Photocell input for Start weighing sequence
- RS232 interface with optional print facility
- LED display with bargraph
- Panel mounted aluminium housing
|
|
|
|
Weighing
Indicator
Mi4000
|
- Fully programmable via keypad and comms port
- Password protected, keypad disable
- Auto calibration and auto tare
- 4.5 digit high resolution
- Gross, Tare and Net functions
- Optional RS 232, RS 485 or current loop interfaces
- Optional analogue output with voltage or current
- Optional up to 16 relay setpoints
- Panel or DIN rail mounting
|
|
|
|
Weighing Indicator
Mini-Mate
|
- An ideal combination of a weighing and control system:
- Simple programming of the dosing sequence via a PC
- Even complex control programs can be written in a few hours using a combination of the 50 proven software modules available
- complete control program typically consists of 15 process
steps and requires no more than 1 hours work
- 8 Input / 8 Outputs or 8 Inputs, 4 Output & Analogue output option; Optional Profibus DP interface available
|
|
|
|
Programmable Weighing Controller
SMART
|
- Approved to OIML R76 for 10,000d
- RS232 and RS422 interfaces for PC / PLC & Printer
- 1000 samples per second, 0.0015% linearity
- Freely programmable using intelligent programming software
- 8 optically isolated inputs and 8 outputs
- Optional Profibus DP interface
- Optional analogue output 0 .. 10V or 0/4...20mA
|
|
