Load Cell Overview
Load Cell Help

Platform Load Cells

Load Cell 1002

Capacities:
0.5, 1, 2, 3, 5, 8,15, 20 kg

Ultra compact, very inexpensive and easy to use Load Cell
Available in capacities from 0.5 - 20 kg
Suitable for platform sizes up to 200 x 200 mm
Ideal for industrial and medical applications
Constructed from high strength aluminium alloy
Sealed to IP 66 with a special silicon coating
Optional 1000 ohm input impedance available

Load Cell 1004

Capacities:
0.3, 0.6, 1.5, 3 kg

Load Cell with very good linearity and reproducibility
Available in capacities from 0.3 - 3kg
Short term resolutions up to 30,000d and more possible
Suitable for platform sizes up to 200 x 200 mm
Ideal for pharmaceutical / medical applications
Sealed to IP 66 with special coating

Load Cell 1006

Capacities:
2, 3, 5 kg

Compact, accurate, easy to use and inexpensive Load Cell
Available in capacities from 2 - 5 kg
Suitable for platform sizes up to 200 x 200 mm
Ideal for industrial and medical applications
Constructed from high-strength aluminium alloy
Sealed to IP 66 with a special coating
Applications in Postal, Counting and General Purpose Scales
Load Cell with very compact and rugged design

Load Cell 1015

Capacities:
3, 5, 7, 10, 15, 20, 30, 50 and 90 kg

Load Cell is available in capacities from 3 - 90 kg
Suitable for platform sizes up to 350 x 350 mm
Constructed from high strength aluminium alloy
Triple beam system with high natural frequency
Optional ATEX version available approved to II 2G EEx ia IIC T4

Load Cell 1022

Capacities:
3, 5, 7, 10, 15, 20, 30, 35, 50, 100, 150 and 200 kg

Available in capacities from 3 - 200 kg
Maximum height 22 mm
Load Cell is suitable for platform sizes up to 350 x 350 mm
Constructed from high strength aluminium alloy
Approved to OIML R60 up to 4000d
Dual beam system with high natural frequency
Optional ATEX version available approved to II 2G EEx ia IIC T4

Load Cell 1040

Capacities:
5, 7, 10, 15, 20, 30, 50, 75 and 100 kg

Available in capacities from 5 - 100 kg
Suitable for platform sizes up to 400 x 400 mm
Constructed from a high strength aluminium alloy
Approved to OIML R60 3000D
Triple beam design with high natural frequency
Optional Sylgard protection for improved sealing
Optional ATEX II 2G EEx ia IIC T4 approval available

Load Cell 1042

Capacities:
1, 3, 5, 7, 10, 15, 20, 30, 50, 75, 100, 150 and 250 kg

Available in capacities from 1 - 250 kg
Suitable for platform sizes up to 400 x 400 mm
Load Cell constructed from high strength aluminium alloy
Approved to OIML R60 up to 6000d
Sealed to IP 66 using a special silicon coating
Optional ATEX II 2G EEx ia IIC T4 approval available

Load Cell 1130

Capacities:
7, 10, 15, 20, 30, 50, 75 and 100 kg

Available in capacities from 7 - 100 kg
Suitable for platform sizes up to 400 x 400 mm
Stainless steel construction
Load Cell is approved to OIML R60 up to 6000d
For high accuracy weighing in harsh industrial environments
Optional ATEX II 2G EEx ia IIC T4 approval available
Sealed to IP 66 using a special silicone coating

Load Cell 1142

Capacities:
10, 15, 20, 30, 50, 75, 100 and 150 kg

Available in capacities from 10 - 150 kg
Suitable for platform sizes up to 400 x 400 mm
Stainless steel construction
Load Cell approved to OIML R60 up to 3000d
For accurate weighing in harsh industrial environments
Optional ATEX II 2G EEx ia IIC T4 approval available
Sealed to IP 66 using a special silicone coating

Load Cell 1242

Capacities:
50, 100, 150, 200, 250 kg

Load Cell Capacities from 50 - 250 kg available
Suitable for platform sizes up to 400 x 400 mm
Constructed from a high-strength aluminium alloy
Approved to OIML R60 up to 3000D
Ideal for medium capacity Platform Scales
Optional ATEX II 2G EEx ia IIC T4 approval available
Sealed to IP 66 using a special silicon coating

Load Cell 1250

Capacities:
50, 75, 100,150, 200, 250, 300, 500, 635, 750, 1000 and 1500 kg

Available in capacities from 50 - 1500 kg
Suitable for platform sizes up to 600 x 600 mm
Constructed from a high strength aluminium alloy
Approved to OIML R60 up to 3000D
Optional ATEX II 1GD EEx ia IIC T6 approval available

Load Cell 1260

Capacities:
30, 50, 75, 100, 150, 200, 250, 300, 500 and 635 kg

Load Cell available in capacities from 30 - 635 kg
Suitable for platform sizes up to 600 x 600 mm
Constructed from a high-strength aluminium alloy
Approved to OIML R60 up to 3000D
Ideal for medium to high capacity Platform Scales
Optional ATEX II 2G EEx ia IIC T4 approval available
Sealed to IP 66 using a special silicon coating

Load Cell 1320

Capacities:
1000, 1500 and 2000 kg

Available in capacities from 1000 - 2000 kg
Front mounting
Suitable for platform sizes up to 1200 x 1200 mm
Constructed from a high-strength aluminium alloy
Load Cell is approved to OIML R60 up to 3000D
Ideal for large high capacity scales and platforms
Optional ATEX II 2G EEx ia IIC T4 approval available

Load Cell 1510

Capacities:
100, 250, 500 kg

Load Cell available in capacities from 100 - 500 kg
Suitable for platform sizes up to 600 x 600 mm
Stainless steel construction
Approved to OIML R60 up to 4000d
Load Cell is Ideal for hostile environments
Optional ATEX II 1GD EEx ia IIC T6 approval available
Hermetically sealed to IP 68 by welding

Load Cell 240

Capacities:
2, 5, 7, 10, 15,
20, 30 and 50 kg

Oil Damped Load Cell
Available in capacities from 2 - 50 kg
Suitable for platform sizes up to 400 x 400 mm
Painted Steel or Stainless Steel housings available
Load Cell with integrated internal overload device for
both over and under loads
Ideal for dynamic applications such as filling and packaging machines

Load Cell Help

Bending / Shear Beam Load Cells

Load Cell 355

Capacities:
5, 10, 20, 30, 50, 100, 200, 250
and 500 kg

Load Cell is pproved to OIML R60 up to 4000D
Stainless steel construction
Available in capacities from 5 kg to 500 kg
Output at Rated Load trimmed to 2mV/V ± 0.1%
Current matched versions available
Load Cell is ideal for platform and floor scales
Optional ATEX II 1GD EEx ia IIC T6 Approval available
Hermetically Sealed to IP68 by welding
A wide range of suitable mounting arrangements available

Load Cell 3410

Capacities:
250, 500, 1000 and 2000 kg

Approved to OIML R60 up to 3000D
Alloy Steel construction.
Available in capacities from 250 kg to 2000 kg
Ideal for floor scales, silo and hopper weighing
Optional ATEX II 1GD EEx ia IIC T6 Approval available
Load Cell sealed to IP67 by potting
A wide range of suitable mounting arrangements available

Load Cell 3510

Capacities:
300, 500, 750, 1000, 1200, 2000,
and 5000 kg

Load Cell is approved to OIML R60 up to 6000D
Stainless Steel construction
Available in capacities from 300 kg to 5000 kg
Ideal for floor scales, silo and hopper weighing
Optional ATEX II 1GD EEx ia IIC T6 Approval available
Sealed to IP68 by welding
Load Cell fitted with a 6 wire double shielded cable
A wide range of suitable mounting arrangements available

Load Cell Mountings

Load Cell
Mounting
SF-3510T

Complete mounting accessory for the load cell 3410/3510
Fixed height rubber foot with domed load adaptor
Robust and corrosion free stainless steel
Ideal for platform, container and floor scales
Provides precise axial and torque free loading
Acid resistant Neoprene material with a high Shore hardness

Load Cell
Mounting
SF-3510T-HA

Complete mounting accessory for the load cell 3410/3510
Height adjustable rubber foot with domed load adaptor
Robust and corrosion free stainless steel
Ideal for platform, container and floor scales
Provides precise axial and torque free loading
Acid resistant Neoprene material with a high Shore hardness

Load Cell
Mounting
SFM-3510T

Complete mounting accessory for the load cell 3410/3510
Flanged rubber foot with domed load adaptor
Robust and corrosion free stainless steel
Ideal for platform, container and floor scales
Provides precise axial and torque free loading
Acid resistant Neoprene material with a high Shore hardness

Load Cell
Mounting
CMX-3510

Complete mounting arrangement for the 3510 load cell
Ideal for Hopper and Silo weighing
Robust, industrial stainless steel construction with mechanical lift off.
Built-in jacking facility
Heavy duty braid between to and bottom plates
Complete with screws and cable protection

Load Cell
Mounting
CMX-355

Complete mounting arrangement for the 355 load cell
Ideal for Hopper and Silo weighing
Robust, industrial stainless steel construction with mechanical lift off.
Built-in jacking facility
Heavy duty braid between top and bottom plates
Complete with screws and cable protection

Load Cell
Mounting
BC-355

Complete mounting arrangement for the 355 load cell
Ideal for platforms, hopper and conveyor scales
High self centering forces for better repeatability
Can be purchase as a complete kit
Ball & cup, base kit and cable protector kit available separately

Load Cell
Mounting
KPE-355

Mounting Accessory:
Ball and Cup Modules

Load Cell
Mounting
BK-355

Mounting Accessory:
Separate Base Kit (Plated Alloy Steel)

Load Cell
Mounting
UPS

Mounting Accessory:
Cable Protector, Spacer and Bolts

Load Cell
Mounting
SF-355

Self aligning foot for the model 355 load cell
Available for load cell capacities from 5 kg up to 250 kg
Stainless steel construction
Excellent load introduction
Low profile
Ideal for constructing low capacity platform scales
Easy installation
Can be used with optional base kit BK-355

Load Cell
Mounting
SHKM-355

Mounting accessory for the 355 load cell
Available for capacities from 5 kg up to 250 kg
ideal for dealing with shock loads and vibration
Provides essential centering forces
Available separately (SHKM-355) or with optional base kit (BK-355)

Load Cell
Mounting
ZV-355

Complete mounting arrangement for the 355 load cell
Available for load cell capacities from 5 kg up to 250 kg
Self aligning rod end bearings
Stainless steel construction
Ideal for low capacity high accuracy applications
Easy installation and removal of the load cell

Load Cell
Mounting
SM-220R

Complete mounting arrangement for the 220 load cell
Available for capacities from 5 to 30 T
Robust, Industrial steel construction
Built in lift off protection
Integrated jacking facility
Can tolerate load misalignment up to ± 3 ° from vertical
Alloy steel and Stainless steel options.

Load Cell
Mounting
PLH1

Self aligning module with excellent load introduction
Complete Installation for the SM63 load cell
Available for load cell capacities from 7.5 tonnes to 300 tonnes
Ideal for the silo, tank and truck scales
Manufactured from high quality tool steel,
Integrated lift off and bumper stops.
Easy assembly, ideal for large silos & tanks

Load Cell Help

Tension / Compression Load Cells

Load Cell 614

Capacities:
50, 100, 150, 200, 300, 500 kg

Available in capacities from 50 kg to 500 kg.
Can be used in tension or compression
Constructed from a high strength aluminium alloy
Approved to OIML R60 3000D
Ideal for all hanging scales
Sealed to IP 67 by potting
Fitted with a 6 wire double shielded cable
Optional ATEX II 2G EEx ia IIC T4 Approval available

Load Cell 615

Capacities:
50, 100, 150, 200, 300, 500, 750, 1000 kg

Available in capacities from 50 kg to 1000 kg.
Can be used in tension or compression
Constructed from a high strength alloy steel
Output at Rated Load trimmed to 2.0 mV/V ± 0.1%
Ideal for all hanging scales
Sealed to IP 67 by potting
Fitted with a 6 wire double shielded cable
Optional ATEX II 2G EEx ia IIC T4 Approval available

Load Cell 616

Capacities:
50, 100, 150, 200, 300, 500, 750, 1000 kg

Available in capacities from 50 kg to 1000 kg.
Can be used in tension or compression
Constructed from a high strength stainless steel
Output at Rated Load trimmed to 2.0 mV/V ± 0.1%
Ideal for all hanging scales
Sealed to IP 67 by potting
Fitted with a 6 wire double shielded cable
Optional ATEX II 2G EEx ia IIC T4 Approval available

Load Cell 619

Capacities:
1500, 2000, 3000 and 5000 kg

Available in capacities from 1500 kg to 5000 kg.
Can be used in tension or compression
Constructed from a high strength alloy steel
Output at Rated Load trimmed to 2.0 mV/V ± 0.1%
Ideal for all hanging scales
Sealed to IP 67 by potting
Fitted with a 6 wire double shielded cable
Optional ATEX II 2G EEx ia IIC T4 Approval available

Load Cell 620

Capacities:
500, 1000, 2000 and
5000 kg

Available in capacities from 500 kg to 5000 kg.
Can be used in tension or compression
Constructed from a high strength alloy steel
Output at Rated Load trimmed to 2.0 mV/V ± 0.1%
Ideal for all hanging scales
Sealed to IP 68 by welding
Fitted with a 6 wire double shielded cable
Optional ATEX II 1GD EEx ia IIC T6 Approval available

High Capacity Load Cells

Load Cell 220

Capacities:
5, 10, 20, 30, 50 t

Approved to OIML R60 up to 6000D
Output trimmed to 2mV/V ± 0.1%
Available in capacities from 5000 to 50000 kg
Ideal for car, silo and tank weighing
Optional ATEX II 1 GD EEx ia IIC T6 approval available
Hermetically sealed to IP68 by welding
A wide range of suitable mounting arrangements available

Load Cell SM63

Capacities:
7.5, 15, 22.5, 30,
40, 50, 100, 150
and 300 t

Approved to OIML R60 4000D
Available in capacities from 7.5 tons to 300 tons
ideal for the silo, tank and truck scales
Optional ATEX II 1GD EEx ia IIC T6 available
Hermetically sealed to IP68 by welding
Current matched to prevent corner errors
Suitable mounting arrangements available

Load Cell Help

Weighing Indicators

Weighing Indicator
NPR

Approved to OIML R76 for 4000d
RS232 and RS422 interface for PC / PLC & Printers
Rugged aluminium housing with screw terminals
Optional analogue output 0/4..20mA 16 bit resolution
2 setpoints with solid state relay outputs
6 opto-isolated logic inputs for remote key operation
Cost effective Industrial Indicator

Battery Powered Weighing Indicator
MW-LE

Approved to OIML R76 for 4000d
RS-232 and RS-422 interface for PC / PLC & Printers
50 samples per second, 0.005% Linearity
Ideal for all mobile weighing applications 12/24 V DC
5 logic inputs and 2 open-collector logic outputs
Piece counting and pre-set tare functions
Rugged aluminium housing with screw terminals connections

Weighing Indicator
QMA

Approved to OIML R76 for 10,000d
RS232 and RS422 interface for PC / PLC & Printer
1000 samples per second, 0.0015% Linearity
4 setpoints with solid state relay outputs
8 opto-isolated logic inputs for remote key operation
Optional Profibus DP interface
Optional analogue output 0 .. 10V or 0/4...20mA

Strain Gauge Transducer Indicator
FMD

Ideal for all force and torque applications
Peak, Track, Min/Max and Hold mode available
RS232 or RS422 interface for connection to PC or PLC
250 samples per second, 0.005% Linearity
Analogue output 0/4..20mA or 0 ..10 V
2 Setpoints with solid state relay outputs
4 optically isolated inputs for remote keyboard operation

Filling Controller & Indicator
SAI-MV

Approved to 4000d NMI, 250 samples/sec 16 bit ADC
Ideal for filling and dosing applications
2 solid state relay outputs for coarse and fine filling
In-flight correction, automatic or manual
Gross or net filling (auto tare on Start filling)
5 logic inputs which includes Start and Stop filling
RS232 interface with ASCII protocol for PC communication
Optional RS422 interface for multi-drop bus
Robust panel mounted aluminum housing

Checkweighing Indicator
SAI-CK

Designed for use with in-line checkweigher
250 samples per second
Approved by NMI to 4000d :Certificate TC2636
Too high, too low and pass judgements in milliseconds
Solid state relay outputs for too high and too low
Photocell input for Start weighing sequence
RS232 interface with optional print facility
LED display with bargraph
Panel mounted aluminium housing

Weighing
Indicator
Mi4000

Fully programmable via keypad and comms port
Password protected, keypad disable
Auto calibration and auto tare
4.5 digit high resolution
Gross, Tare and Net functions
Optional RS 232, RS 485 or current loop interfaces
Optional analogue output with voltage or current
Optional up to 16 relay setpoints
Panel or DIN rail mounting

Weighing Indicator
Mini-Mate

An ideal combination of a weighing and control system:
Simple programming of the dosing sequence via a PC
Even complex control programs can be written in a few hours using a combination of the 50 proven software modules available
complete control program typically consists of 15 process
steps and requires no more than 1 hours work
8 Input / 8 Outputs or 8 Inputs, 4 Output & Analogue output option; Optional Profibus DP interface available

Programmable Weighing Controller
SMART

Approved to OIML R76 for 10,000d
RS232 and RS422 interfaces for PC / PLC & Printer
1000 samples per second, 0.0015% linearity
Freely programmable using intelligent programming software
8 optically isolated inputs and 8 outputs
Optional Profibus DP interface
Optional analogue output 0 .. 10V or 0/4...20mA

Load Cell Help

Analogue Load Cell Amplifiers

Strain Gauge Amplifier
LAU 63.1

Ideal for Force measurement applications
Output 0- ±10V DC
Linearity better than 0.010% of full scale
Designed to drive 1 off 350-2K Ohm Load Cell
Zero offset ±0.7 mV/V in 0.1 mV/V steps
Relative Gain Settings between x1 and x7
Selectable low pass filter 3.3 Hz to 3300 Hz
Shielded PCB construction

Strain Gauge Amplifier
LAU 73.1

Output 0-20mA or 4-20mA or 0-10V (with resistor)
Linearity better than 0.010% of full scale
Input signal range -0.2mV/V to +2.3 mV/V
Zero offset 0-65% (1.5mV/V) of full scale
Selectable gain allowing signals as low as 0.25mV/V to be amplified to 20mA
Selectable low pass filters between 0.33Hz and 33Hz
Shielded PCB construction with simple connectors

Universal Load Cell Amplifier
LAC 65.1

Linearity better than 0.010 % of full scale
Analogue Output 0/4-20mA and 0-±10V DC
Capable of driving 8 off 350 Ohm load cells
Active low pass filter from 0.25 Hz to 32 Hz
Zero offset up to ±80% of full scale
Input signal range up to ±3.3mV/V
Zero and Span coarse and fine adjustment
Steel case mounted on Phoenix DIN rail module

Load Cell Amplifier
LAC 74.1

Linearity better than 0.010% of full scale
Analogue outputs of 0/4..20mA or 0 -10V DC
Active low pass filter from 0.33Hz to 33Hz
Zero offset up to ±90% of full scale
Input signal range up to 3.5 mV/V
Zero and Span coarse and fine adjustments
PCB with plated steel case mounted on DIN rail clips

Load Cell Amplifier
LAB 101.1

Precision strain gauge amplifier using a 4-20mA passive output
2 wire technology for cable lengths up to 1000 m
Compact aluminium housing, only 16 mm high
Industrial specification EMC protection, 30 V/m EMI tested
Sealed to IP 65 using metal PG type glands
Fine adjustment of both zero and gain

Load Cell Amplifier
LAB 104.1

10V DC output which is short circuit protected
All strain gauge transducer with input impedance between 250 and 2000 Ohms can be connected
Compact, highly accurate, inexpensive amplifier
Aluminium housing with 2 metal PG glands
Amplifier supply voltage 14 to 28 V DC
Active low pass filter from 3.3 Hz to 33 Hz

Load Cell Help

Digital Load Cell Amplifiers

Load Cell Amplifier
DAS 72.1

Can be calibrated directly from load cell mV/V sensitivity
2400 internal conversions/second ± 18 bit resolution
Linearity better than 0.002% signal resolution ~50nV
Designed to drive four 350 Ohm Load Cell
± 3.2mV/V input maximum.
Digital display maximum -99,999 to +99,999 counts
Analogue output 0-20mA
RS-422/RS-485, 2 or 4 wire Computer Interface
3 Optically Isolated Logic Inputs
3 Optically Isolated Open Collector Logic outputs

Load Cell Amplifier
LDU 68.1

Approved to OIML R76 10,00d 1uV/d, CE certified
Bipolar input range for weight, force or torque applications
80 samples/second at greater than 16 bit resolution
Linearity better than 0.005 %, Signal resolution ~50 nV
Maximum read out ± 99,999 count
RS-422/RS-485, 2 or 4 wire Computer Interface
2 logic inputs and 2 logic outputs.

High Precision Load Cell Amplifier
LDU 69.1

Approved to OIML R76 10,000d, 0.1uV = 1dLinearity better than 0.002 %, signal resolution ~ 20 nV
Extremely low temperature drift typically 1ppm/°C
Bipolar input range for weight, force or torque applications
Up to 172 readings per second transmitted
RS-422 / RS-485 2 or 4 wire Computer Interface
Full computer control and set-up via the computer interface
Full wrap around steel case for better EMC performance